Table of Contents
Advertisement
Printer Properties
This chapter describes the settings for the printer properties.
Windows 98/Me Properties
With CARPS, you initiate printing as you normally would from a Windows application. If you want to
view or change the print options, access the properties dialog box of CARPS. You can access the
[Canon L180/L380S/L398S Properties] or the [Canon LC310/L390/L408S Properties] dialog box both
from the application's [Print] dialog box and the [Printers] folder.
To access the dialog box, follow the procedure below.
The screen shots shown are for the FAX-L380S model.
NOTE
•
The number of tabs displayed in the [Canon L180/L380S/L398S Properties] or the [Canon LC310/L390/L408S
Properties] dialog box will vary, depending on the type of operating system you are using and the method you use
to access the dialog box.
•
The method you use to access the dialog boxes determines how long the printing options remain in effect:
- If you access the dialog box from an application's [Print] dialog box, your selected printing options apply only to
the current print job. They will not be stored when you close the application.
- If you access the dialog box from the [Printers] folder, selected printing options apply to all Windows applications
and remain in effect until you change those settings.
■ From a Windows Application
1
From the [File] menu of the application, select [Print].
The [Print] dialog box appears.
2
Click [Properties] Folder.
The [Canon L180/L380S/L398S Properties] or the [Canon LC310/L390/L408S Properties] dialog box appears.
CHAPTER
Windows 98/Me Properties
3-1
Advertisement
Table of Contents
