Connect Telephone Cables; Install Handset - Canon FAXPHONE L120 Starter Manual

Connect Telephone Cables and Install Handset

Connect Telephone Cables

Connect the supplied telephone cable to the line jack (A) and the wall jack.
Connect the handset cable to the handset jack (C).
Connect any external device to the external device jack (B) if required.
3
Insert the plugs (with the cradle) into the holes on
the machine.
7
C
B
A
4
Carefully push the pins into the plugs as far as they
will go.

Install Handset

1
Use a screwdriver to remove the covers on the left
side of the machine.
5
Place the handset on the cradle.
2
A
Insert the plugs with pins (A) into the holes on the
handset cradle.
NOTE
Do not insert the pins all the way into the plugs at this
point.
6
A
Hook the handset cable on the retainer (A) at the
back of the machine to retain the slack.
NOTE
If using the handset or an external telephone, make sure
to set the fax receive mode to <FAX/TEL>, <MANUAL>,
or <DRPD>. For instructions on how to set the receive
mode, see "Set the Receive Mode," on p. 16.
8