BENDIX AutoVue FLC-20 Service Data
  1. Manuals
  2. Brands
  3. BENDIX Manuals
  4. Automobile Accessories
  5. AutoVue FLC-20
  6. Service data

BENDIX AutoVue FLC-20 Service Data

Hide thumbs Also See for AutoVue FLC-20:
Table of Contents

Advertisement

Quick Links

®
Bendix
AutoVue
™
(See SD-61-4963 for the Bendix

1.0 DESCRIPTION

The Bendix
AutoVue
™
®
used in many Bendix safety systems, including:
• The AutoVue
Lane Departure Warning (LDW) System by
®
Bendix CVS; and
• The Bendix
Wingman
®
For more information about the Bendix Wingman Fusion
System, see Service Data Sheet, SD‑61‑4963. For free
downloads of Service Data Sheets, visit the Bendix website
at bendix.com.
This document covers installation, troubleshooting, and
replacement for this camera.
Bendix safety technologies complement safe driving
practices. No commercial vehicle safety technology
replaces a skilled, alert driver exercising safe driving
techniques and proactive, comprehensive driver
training. Responsibility for the safe operation of the
vehicle remains with the driver at all times.
Road Lane Markings
Roof-mounted Telematics
Antenna
Figure 2 – Operational View
FLC-20
Camera
™
®
Wingman
Fusion
Active Safety System)
®
®
™
FLC-20
camera is a component
™
Fusion
Active Safety System.
®
™
Vehicle Equipped with the
Bendix
Wingman
Fusion
System
®
®
™
Bendix
AutoVue
™
Windshield-mounted Visible
Light Camera
The camera bracket
is attached to the
windshield, and the
camera snaps into it.
(See Section 3.1)
Camera
Figure 1 – Bendix
RADAR Beam
FLC-20
Camera
®
™
Camera Lens
Radar Sensor
AutoVue
FLC-20
™
®
™
Front Bumper-Mounted
Radar Sensor
Camera
Detected Forward
Vehicle
NOT TO SCALE
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AutoVue FLC-20 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BENDIX AutoVue FLC-20

Summary of Contents for BENDIX AutoVue FLC-20

  • Page 1: Description

    ® ™ For more information about the Bendix Wingman Fusion System, see Service Data Sheet, SD‑61‑4963. For free downloads of Service Data Sheets, visit the Bendix website at bendix.com. Camera Lens This document covers installation, troubleshooting, and replacement for this camera.

  • Page 2: General Safety Guidelines

    Active ® ® ™ Bendix safety technologies complement safe driving Safety System can result in a collision causing property practices. No commercial vehicle safety technology damage, serious injuries, or death. Be sure to read, replaces a skilled, alert driver exercising safe driving...

  • Page 3: Table Of Contents

    ® Starting Bendix ACom Diagnostic Software ......7 Reading Diagnostic Trouble Codes (DTCs) ......7 Diagnostic Trouble Codes .

  • Page 4: Troubleshooting

    The screen will revert to displaying camera DTCs. the icon shown, until the problem is resolved. Normal Operation IMPORTANT The LDW system is actively seeking System Problems. If a problem with the Bendix ™ lane-markings. AutoVue FLC-20 camera is detected, it should be ®...

  • Page 5: Camera Test Image

    2.3 CAMERA TEST IMAGE Take a Test Image Using the Latest Version of Bendix ACom Diagnostic Software ® ® Troubleshooting a camera may be assisted by viewing a test image from the camera to ensure it is not blocked, or has another problem.

  • Page 6: Temporarily Disable The Lane Departure Warning (Ldw)

    ® ® ™ has an enable/disable switch. The Bendix switch design or or similar method. In these cases, some features of the a similar OEM switch may be used. See Figure 5. Fusion system will not be available.

  • Page 7: Starting Bendix Acom Diagnostic Software

    Once a successful connection has been made, these steps will no longer be necessary. The Bendix ACom Diagnostic Software for ABS User Guide is available for download at bendix.com and should be used as a reference to all functions of the ACom service tool.

  • Page 8: Table Of Dtcs And Service Action Codes

    Note: The system will not report newly active J1939 DTCs until the engine has been running for 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Table 1 – DTC Code to Service Action Code (Pages 8–10)
  • Page 9 Note: The system will not report newly active J1939 DTCs until the engine has been running for 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Table 1 – DTC Code to Service Action Code (Pages 8–10)
  • Page 10 Note: The system will not report newly active J1939 DTCs until the engine has been running for 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Table 1 – DTC Code to Service Action Code (Pages 8–10)

  • Page 11: Table Of Service Action Codes

    Clear the camera’s DTCs using the procedure in Section 2.18 Clearing Diagnostic Trouble Codes. If the error returns, call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2. Representatives are available 8:00 a.m.-6:00 p.m. ET, Monday - Thursday, and 8:00 a.m.-5:00 p.m. on Friday, to assist you.
  • Page 12 Clear the camera’s DTCs using the procedure in Section 2.18 Clearing Diagnostic Trouble Codes. If the error returns, call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2. Representatives are available 8:00 a.m.-6:00 p.m. ET, Monday - Thursday, and 8:00 a.m.-5:00 p.m. on Friday, to assist you.
  • Page 13 Clear the camera’s DTCs using the procedure in Section 2.18 Clearing Diagnostic Trouble Codes. If the error returns, see the Bendix Wingman Fusion System (SD-61-4963) Service Data Sheet for more troubleshooting information, or call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2.
  • Page 14 Clear the camera’s DTCs using the procedure in Section 2.18 Clearing Diagnostic Trouble Codes. If the error returns, call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2. Representatives are available 8:00 a.m.-6:00 p.m. ET, Monday - Thursday, and 8:00 a.m.-5:00 p.m. on Friday, to assist you.

  • Page 15: Troubleshooting Diagnostic Trouble Codes: Power Supply

    The rectangular connector is a JST [P/N SM09B-HCHK-TB(LF)(SN) (9-pin)]. It mates with a JST harness connector This connector is an Amphenol HCHFB-09-KE that uses female pins [P/N HSD-NARP-PCB-12B] JST [P/N SHCM-A03T-P025 (tin-plated)]. (4-pin shielded connector). Power Supply Pin Codes (4.5) (Looking into the Back of the Harness Connector) Figure 9 –...

  • Page 16: Serial Data (Private Communications) Troubleshooting Procedure

    ® ® ™ If the connector terminals are corroded, this may be • The SafetyDirect by Bendix CVS Web Portal ® an indication of water intrusion into the wiring system Processor (SD‑65‑21025) and possibly the camera sensor. Replacement of the 1.

  • Page 17: Private Communications Network Test Procedure

    Code (DTC) if these messages are not present, or if there shorts to voltage or ground. is a problem with the private communications system. Go to the Bendix Wingman Fusion System Service Data Sheet (SD‑61‑4963) for full troubleshooting information. If the connector terminals are corroded or damaged, this may be an indication of water intrusion into the wiring 2.17 TROUBLESHOOTING...

  • Page 18: Typical Installation

    3.0 TYPICAL INSTALLATION The Bendix AutoVue FLC-20 camera is installed on the windshield at a position determined by Bendix engineering ™ ® ™ and the OEM. See Figure 11. (When replacing a camera bracket, temporarily mark the location of the top of the original bracket to help position the replacement.)
  • Page 19 Bottom and Center of Windshield - Viewed from Inside. Torpedo level Angular Note: Use only tolerance of +/-1º Bendix-approved windshield adhesive when remounting a camera bracket Center (included with Line Mark the bracket kit) NOTE: Some A small “Torpedo” Level...

  • Page 20: Camera Removal

    1. Engage the top of 2. Rotate the camera into 3. Listen for the click as IMPORTANT: Double-check that the the camera into the the bracket the bracket engages the camera is fully engaged into the bracket camera bracket. Hinge Point WRONG - TOO WIDE Verify that the channel between...

  • Page 21: Bracket Removal

    When replacing cameras only, use replacements with the number supplied by Bendix or the OEM. If you have questions, same part number (or a direct superceding replacement contact the Bendix Tech Team at 1-800-AIR-BRAKE number supplied by Bendix).

  • Page 22: Service Action Codes

    Note: The system will not report newly active J1939 DTCs until the engine has been running for 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Appendix A (Pages 22–25)
  • Page 23 Note: The system will not report newly active J1939 DTCs until the engine has been running for 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Appendix A (Pages 22–25)
  • Page 24 Note: The system will not report newly active J1939 DTCs until the engine has been running for 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Appendix A (Pages 22–25)
  • Page 25 Note: The system will not report newly active J1939 DTCs until the engine has been running for 15 seconds. Do not attempt to diagnose J1939 DTCs without the engine running. Call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2, for troubleshooting assistance. Appendix A (Pages 22–25)

  • Page 26: Appendix B - Bendix Wingman Fusion System Component Schematic

    APPENDIX B - BENDIX WINGMAN FUSION SYSTEM COMPONENT SCHEMATIC ® ® ™ Bendix Driver ™ Bendix ® Vehicle Interface Unit EC-80 ® ™ Sensors (DIU Controller ™ J1939 J1939 Ground Ignition 12V Battery 12V 6 - J1939 Low 1 - J1939 High...

  • Page 27: Appendix C - Controller Configuration Changes

    ADDITIONAL SUPPORT For direct telephone technical support, call the Bendix Tech Team at 1-800-AIR-BRAKE (1-800-247-2725), option 2. Follow the instructions in the recorded message. Representatives are available 8:00 a.m. - 6:00 p.m. Monday - Thursday and 8:00 a.m. - 5:00 p.m. Friday, ET.
  • Page 28 WESTERN STAR, and any other company or trademark are solely for identification and cross reference purposes. The trademarks are the property of their respective companies and are not affiliated with or endorsing Bendix Commercial Vehicle Systems LLC. Bendix Commercial Vehicle Systems LLC does not represent any parts shown as products manufactured or remanufactured by the companies so named herein.

Table of Contents

Save PDF