Specifications; Ec Declaration Of Conformity - Makita DFL651F Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Fastening torque With battery BL1815
BL1815N / BL1820 /
BL1820B / BL1830 /
BL1830B / BL1840 /
BL1840B / BL1850 /
BL1850B / BL1860B
No load speed
Standard battery cartridge
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
*1
• No load speed is adjustable with exclusive application.
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
Model
Hard joint
Soft joint
With battery Hard joint
Soft joint
Square drive
*1
Dimensions
Net weight
) : 72 dB(A)
pA
2
) : 2.5 m/s or less
h
2
9.5 mm or 12.7 mm
BL1815 / BL1815N / BL1820 /
BL1820B
583 mm x 75 mm x 116 mm
2.5 kg
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):
Designation of Machine:
Cordless Angle Screwdriver
Model No./ Type: DFL651F
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The Technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
4 ENGLISH
DFL651F
25 - 58 N • m
25 - 50 N • m
25 - 65 N • m
-1
80 - 200 min
BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B /
BL1860B
600 mm x 75 mm x 116 mm
2.7 kg
D.C. 18 V