Pjl Job Offset On/Off; Ps Job Offset On/Off - Brother PCL Technical Reference Manual

2006/05/31

3.1.6. PJL job offset on/off

Format
@PJL SET/DEFAULT JOBOFFSET=ON/OFF
Parameter
•
ON:
•
OFF:
Default = ON
Explanation
• This command selects the job offset.
• This command is ignored when the Finisher/Stapler unit is not available.
• The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.

3.1.7. PS job offset on/off

Command
Parameter
bool
• True:
•
False:
Default = false
Explanation
• This command selects the job off set.
• This command is ignored when the Finisher/Stapler unit is not available.
<Example>
<<BRjoboffset true>>setpagedevice
3.1.8. PCL job separate (Esc&l1T)
Command
Esc&l1T (27)(38)(108)(49)(84)
Explanation
• This command separates the job.
• This command is ignored when the Finisher/Stapler unit is not available.
APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 6
Paper is ejected offset by each job.
Paper is ejected together.
Paper is ejected offset by each job.
Paper is ejected together.
<1Bh><26h><6ch><31h><54h>