Brother PCL Technical Reference Manual page 234

2006/05/31
Variables
FONTSOURCE
FONTNUMBER
PITCH
PTSIZE
Description
Sets the font source to Internal
fonts or Permanent Soft Fonts
Sets the font number
Pitch of the default font in units of
characters per inch. The pitch value
can be specified to two decimal
places
Height of the default font in units
of points. The point size can be
specified to a quarter of a point
CHAPTER 5 PJL- 36
Sample Value Range
I or S (HL-1050/1070/1250/1270N/
1450/1470N/P2500/1650/1670N/
1850/1870N/5040/5050/5070N/
5140/5150D/5170DN/2070N/5240/
5250DN/5270DN/5280DW)
I, C1, C2, S (HL-3260N/2460/
7050)
I, C,S (HL-6050/6050D/6050DN/
8050N)
0 to n (HL-
1050/1070/1250/1270N/
1450/1470N/P2500)
0 to 0x7FFFFFFF (HL-1650/
1670N/3260N/2460/7050/1850/
1870N/5040/5050/5070N/5140/
5150D/5170DN/6050/6050D/
6050DN/8050N/2070N/5240/5250
DN/5270DN/5280DW)
0.44, 0.45,.......99.99
4.00, 4.25, .......999.75