Canon EOS 1Ds Mark II Instruction Manual page 30

5
Using the <
5
The < > dial is used for AF point selection and selecting the desired
setting on the LCD monitor. This <
switch is set to <
There are three ways to use this <
30
> Dial
1
>.
(1) While pressing a button, turn the
5
<
¡In this way, you can select and set
¡You can also review and select images
(2) After pressing a button, turn the
5
<
When you press a button, its function
remains on for 6 seconds (
this time, you can turn the <
set the desired setting.
After the button turns off or if you press
the shutter button halfway, the camera
will be ready to shoot.
¡In this way, you can select the AF point
(3) Turn the <
While turning the <
setting in the viewfinder or on the top
LCD panel.
¡In this way, you can set the aperture in
5
> dial works only when the <
5
> dial:
> dial.
various menu settings or set flash
exposure compensation. When you let
go of the button, the selected setting
takes effect.
on the LCD monitor with this dial.
> dial.
or set the exposure compensation.
5
> dial only.
the camera's manual exposure mode.
9
). During
5
> dial to
5
> dial, look at the
7
>