Trimming The Image - Canon EOS 1D Instruction Manual

wPrinting

Trimming the Image

1
On the print setting screen, select [Trimming].
2
Set the trimming frame size, position, and proportion.
The image area within the trimming frame will be printed.
Changing the trimming frame size
When you press the <u> or <y> button, the size of the trimming
frame will change. The smaller the trimming frame, the larger the
image magnification will be for the printing.
Moving the trimming frame
Use <9> to move the frame over the image vertically or horizontally. Move
the trimming frame until it shows the desired image area or composition.
Rotating the frame
Each time you press the <B> button, the trimming frame will
toggle between the vertical and horizontal orientations. This enables
you to create a vertical-oriented print from a horizontal image.
3
Press <0> to exit the trimming.
The print setting screen will reappear.
You can check the trimmed image area on the upper left of the print setting screen.
Depending on the printer, the trimmed image area might not be printed as you specified.
The smaller you make the trimming frame, the grainier the picture will look
on the print. If the picture will be too grainy, the trimming frame will turn red.
While trimming the image, look at the camera's LCD monitor. If you look at the
image on a TV screen, the trimming frame might not be displayed accurately.
The shape of the trimming frame can be changed with [Paper settings].
146
You can crop the image and print only
the trimmed portion as if the image was
recomposed. Do the trimming right
before printing. If you set the trimming
and then set the print settings, you may
have to set the trimming again.