Eyepiece Shutter - Canon EOS 1D Instruction Manual

Eyepiece Shutter

Connecting the Remote Switch
You can connect Remote Switch RS-80N3 or Timer Remote Controller
TC-80N3 (both optional) or any EOS accessory equipped with an N3-
type terminal to the camera and shoot with it.
To operate the accessory, refer to its instruction manual.
If your eye is not looking at the
viewfinder, stray light entering the
eyepiece can adversely affect the
exposure. To prevent this, slide the
eyepiece shutter lever as shown by the
arrow to shutter the eyepiece.
Open the terminal cover.
1
Open the upper cover.
Connect the plug to the remote
2
control terminal.
Connect the plug as shown in the
illustration.
To disconnect the plug, grasp the
plug's silver part and pull out.
Bulb Exposures
103