Installing and Removing the Battery
Battery Life
Temperature
Possible Shots
The figures above are based on a fully-charged LP-E4, no Live View shooting,
and CIPA (Camera & Imaging Products Association) testing standards.
The actual number of shots may be fewer than indicated above
depending on the shooting conditions.
Pressing the shutter button halfway for long periods or operating only the
autofocus can also reduce the number of possible shots.
The number of possible shots will decrease with more frequent use of
the LCD monitor.
For battery life when Live View shooting is used, see page 114.
Removing the Battery
If the battery's rubber lining (to repel water) is not clean, use
a moist cotton swab to wipe it clean.
30
At 23°C / 73°F
Approx. 2200
Flip out the battery release
1
handle and turn it as shown by
the arrow.
Pull out the battery.
2
To prevent shorting, be sure to attach
the protective cover to the battery.
When not using the camera, attach
the battery compartment cap.
At 0°C / 32°F
Approx. 1700
Rubber lining