Usage; Connecting Power Supply; Operating - Fakir RH12 Instruction Manual

GB
Connecting Electric Oil
Radiator to AC power supply:
Operating Electric
Oil Radiator:
24
USAGE OF HALOGEN OIL RADIATOR
Set the distance between radiator and plug to avoid cable
tense. Turn thermostat adjust button 'MIN' position. Connect
plug of radiator to the grounded power socket.
Check whether thermostat adjust button is on 'MIN' position.
Connect plug of radiator to the grounded power socket. In the
first usage, set it maximum temperature stage by turning
thermostat adjust button to the clockwise (right).
Set it 3. stage (•••) working position by turning stage adjust
button to the clockwise (right).
1.When stage adjust button is turned to 1. stage, the resistance
starts to work at the lowest heat level of 800W. (•)
2. When stage adjust button is turned to 2. stage, the resistance
starts to work at the middle heat level of 1200W. (••)
3. When stage adjust button is turned to 3. stage, the resistance
starts to work at the highest heat level of 1200+800=2000W.
(•••)
4. 800W stage can be swith on and off due to the room
temperature for secure working.
5. Stage adjust button is set to halogen heater position, halogen
heater starts to work. (800W)
6. When it is set to halogen heater + 3.stage, they start to
work all together. (800+2000=2800W)
Thermostat that is used in appliance can only be used
for cut the circuit of the radiator when the temperature
becomes desired room temperature. Thermostat do not
cut the halogen heaters' cuircuit.
ATTENTION