KRYO
FORTRESS
™
Commercial Refrigeration Motor
Installation Guide
WARNING indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
• Read and follow all instructions carefully.
• Disconnect and lock out the main power from the unit being
serviced before making any wiring connections to the KRYO
FORTRESS motor. It is also a good practice to confirm that the
power is disconnected with a voltmeter. Working on or near
energized equipment can result in severe injury or death.
• Do not operate equipment without guards in place. Exposed
equipment can result in severe injury or death.
• Improper installation, adjustment, alteration, service,
maintenance, or use can cause explosion, fire, electrical shock,
or other conditions which may cause personal injury, death, or
property damage. Consult a qualified installer, service agency,
or your distributor or branch for information or assistance.
The qualified installer or agency must use the supplied or
recommended parts when installing or servicing this product.
Electrical Connections (Stock # MD5411S)
CW Rotation - Connect 2-pin (White and Black wires) plug only
CCW Rotation - Add Red wire to L1 or L2
Notes
1.
The 2-pin plug is not polarity sensitive
2.
The motor will automatically operate from an input voltage from 90-240 VAC
3.
Rotation is listed as viewed from lead end
1
Red
2- pin
White
Plug
Black
Regal Beloit America, Inc.
1325 Heil Quaker Blvd.
LaVergne, TN 37086
Customer Service: 800-672-6495
thedealertoolbox.com
CAUTION indicates a hazardous situation that, if not avoided, could
result in minor or moderate injury.
• Periodic inspections should be performed. Failure to perform
proper maintenance can result in premature product failure and
personal injury.
™
• Installation and service of this motor should be performed
only by trained service technicians familiar with the KRYO
FORTRESS motor.
• This motor should be installed in accordance with accepted
practices and installation instructions, and in compliance with all
national and local codes.
F O R M
G0059E
Revised
May 2018
Line 1
90-240 VAC
Line 2
™
Need help?
Do you have a question about the Genteq KRYO FORTRESS and is the answer not in the manual?
Questions and answers