Storing The Appliance; Descaling Appliance; Disposal; Problem-Solving - Silvercrest SEAD 1800 B1 Operating Instructions Manual

BB&3(B%ERRN 6HLWH  'RQQHUVWDJ  1RYHPEHU    
5. Rinse off with clean water.
6. Screw the tap lever|4 back onto the
tap|5.
9.3

Storing the appliance

1. Wind the mains cable back up on the
underside of the appliance.
2. Insert the power supply plug back in
the middle of the appliance base.
3. Put the appliance away.
9.4

Descaling appliance

Depending on the hardness of your water, li-
mescale may build up in the appliance. You
should remove this regularly to save energy,
increase the service life of the appliance
and for hygiene reasons.
1. Wipe over surfaces with limescale us-
ing a cloth soaked in a little vinegar.
2. If the appliance has severe limescale,
pour a commercially available descaler
into the container|3 and leave to stand
overnight.
WARNING! Risk of material damage!
The appliance may under no circumstances
be switched on whilst being descaled. This
could lead to damage.
3. Rinse thoroughly afterwards.
4. Do not use the appliance again until it
is completely dry.

10. Disposal

The symbol showing a wheelie
bin crossed through indicates
that the product requires sepa-
rate refuse collection in the Eu-
ropean Union. This applies to
the product and all accessories
marked with this symbol. Products identified
with this symbol may not be discarded with
normal household waste, but must be taken
62 GB
to a collection point for recycling electric and
electronic appliances. Recycling helps to re-
duce the consumption of raw materials and
protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

11. Problem-solving

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER of electric shock!
Do not attempt to repair the device
yourself under any circumstances.
Possible causes /
Fault
• Has the device been con-
nected to the power sup-
ply?
• Check the connection.
No function
• Has the thermal cut-out
switched off the device?
(see "Thermal cut-out" on
page 58)
12. Technical
specifications
Model: SEAD 1800 B1
Capacity: approx. 27 litres
Mains voltage: 220-240 V ~ 50 Hz
Protection class: I
Power rating: 1800 W
Subject to technical modification.
Action