Adjustment; Steering Friction; Throttle Grip Friction - TOHATSU M 4C Owner's Manual

ADJUSTMENT

ENOM00073-E
E

1. Steering friction

Tiller handle type
ENOW00074-F
WARNING
Do not over tighten the steering friction
adjustment screw it could result in difficulty
of movement resulting in the loss of control
causing an accident and could lead to severe
injury.
ENON00506-0
Note
The steering friction adjustment screw is
used to adjust the friction load of the
steering, but not to fix the steering. Excess
tightening of the adjustment bolt may
cause damage to the swivel bracket.
Steering friction can be adjusted in
accordance with your preference by
turning the steering friction adjustment
screw.
2
1. Steering friction adjustment screw
2. Lighter
3. Heavier
EENOM00074-A
ENOW00074-B
Do not overtighten the throttle adjustment
screw or it could result in difficulty of move-
ment resulting in the loss of control causing
an accident and could lead to severe injury.
Friction adjustment of the throttle grip
can be made with the throttle adjustment
screw.
1
1. Throttle friction adjustment screw
2. Heavier
3. Lighter
3
ENOF02133-0

2. Throttle grip friction

WARNING
2
3
43
1
9
ENOF02134-0