Yolink Finger User Manual page 16

Unpairing
Find the paired controller(Master) YoLink remote.
Hold the relative ON button for 10-15 seconds,
the light will flash red quickly.
Find the paired responder(Receiver) YoLink
Finger. Hold the set button for 10-15 seconds,
the device will flash red quickly.
The above two devices will unpair by themselves
and the light stops flashing.
After unbundling, when press the relative ON
button on the YoLink Remote, the YoLink Finger
will no longer click the switch button once.
Note
For YoLink Finger, you can only set up YoLink Control between YoLink Finger and YoLink
Remote (YS3603-UC).
SET BUTTON
ON
SET
DOWN UP
14