Installation - Yolink Finger User Manual

Installation

Note
Please add YoLink Finger and Garage Door Sensor 2 to YoLink App before you install
them.
YoLink Finger
Place the YoLink Finger close to the switch panel, use UP and DOWN button to adjust
the finger, make sure it is at the right position to press down the switch button and
open the garage door.
Please dry clean the area first.
Peel off the surface on the double-side
tape on the bottom of the YoLink Finger.
Stick tightly the finger to the clean area.
SWITCH PANEL
Adjust the position of the finger
1
SET
DOWN UP
FINGER
UP BUTTON
DOWN BUTTON
8