Advertisement
Covered by one or more of the following US Patents: 10,451,235 / 10,371,333 / 10,520,149 / 10,731,810.
HEATER DEFAULT SETTING:
The default factory setting for your thermostat is 82 degrees. If your room temperature is already 82 degrees
or above, then your heater will shut OFF after about 3 minutes. See thermostat directions for how to adjust
the temperature settings in order to keep your heater ON until your desired room temperature is reached.
Quantum Flame and the Quantum Flame logo are registered trademarks of Living Style (B.V.I.) Limited. All rights reserved.
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this electric fireplace/heater. We
strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
USE AND CARE GUIDE
COMBINATION ELECTRIC FIREPLACE/HEATER
Additional US and International Patents Pending.
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday
9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
improvement needs. Thank you for choosing Home Decorators Collection!
THANK YOU
Model #WH100-23I2D-R
WH100-26I2D-R
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Home Decorators Collection WH100-23I2D-R
Summary of Contents for Home Decorators Collection WH100-23I2D-R
- Page 1 THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this electric fireplace/heater. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home...
-
Page 2: Table Of Contents
Table of Contents Table of Contents .............. 2 Package Contents ..............4 Safety Information ............2 Operation ................. 5 Important Safety Information ...........2 Using the Remote Control ..........7 Grounding Instructions .............3 Care and Maintenance ............9 Troubleshooting .............. 10 Warranty ................3 Pre-Operation .............. -
Page 3: Grounding Instructions
Safety Information (continued) GROUNDING INSTRUCTIONS DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product. -
Page 4: Pre-Operation
Pre-Operation ELECTRICAL SPECIFICATIONS □ Voltage: 120 V AC, 60 Hz □ Watts: 1500 Watts PACKAGE CONTENTS Part Description Quantity Fireplace Remote control... -
Page 5: Operation
Operation Identifying the control panel Understanding the function indicator □ The control panel is located on the top left corner of the □ The function indicator (2) has three square LEDs – red, green, fireplace/heater unit. and blue. The red LED indicates that the Fahrenheit temperature heating function is running, the green LED □... - Page 6 Operation (continued) Using the heater control NOTE: The heater default temperature is set to 82 degrees Fahrenheit. If your ambient room temperature is above 82 degrees, then your heater will automatically shut off after few minutes. Adjust your heater thermostat (see below) to a higher temperature in order to keep your heater ON above 82 degrees.
-
Page 7: Using The Remote Control
Operation (continued) □ To unlock the flame function, press and hold the flame button (5) for five seconds. The log lights flash several times and then both flame lights and log lights turn on. Using the main power button Press the power button (6) to turn the fireplace/heater unit on and off. Press the power button (6) once to turn the unit on. Press □... - Page 8 Using the Remote Control (continued) Battery Replacement Do not mix old and new batteries. NOTE: Do not mix alkaline, standard (carbon zinc), or rechargeable (nicad, nimh, etc.) batteries. WARNING: Do not ingest batteries. 1. Non-rechargeable batteries are not to be recharged. NOTE: 2.
-
Page 9: Care And Maintenance
Care and Maintenance WARNING: Always disconnect from the power supply before cleaning the heater. First turn off the main power. Then remove the electrical plug from the wall outlet. WARNING: Do not use this fireplace insert if any part of it has been under water. -
Page 10: Troubleshooting
Troubleshooting Problem Solution Cannot adjust the temperature. □ To adjust temperature, turn on the Heater, then press the Heater button to enter Temperature Adjustment Mode. The LED display will start to flash, then press the Heater button repeatedly until you reach your desired temperature setting. - Page 12 Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Need help?
Do you have a question about the WH100-23I2D-R and is the answer not in the manual?
Questions and answers