Using The Vl-3 Video Light (Optional) - Canon MVX100 Instruction Manual

Using the VL-3 Video Light (Optional)

This video light enables you to record brightly in colour even in dark places. This VL-3
E
Video Light attaches to the camcorder's
operation and is powered by the camcorder's power supply.
Refer also to the VL-3 Video Light instruction manual.
❍ Always turn off the camcorder before attaching/removing the video light.
❍ Do not touch or place flammable material or plastic close to the lamp or the
surrounding parts during or immediately after use; they become very hot.
❍ Do not look directly at the lamp while the video light is on.
❍ Do not carry the camcorder by the video light.
1. Remove the accessory shoe cover.
2. Slide the video light into the
accessory shoe until it clicks.
3. Tighten the shoe lock.
Be careful that the video light does not come
off when tightening the shoe lock.
4. Set the camcorder to CAMERA or
CARD CAMERA mode.
5. Set the video light's power switch to
AUTO or ON.
• (Connection) appears.
• ON: The video light stays on.
• AUTO: The video light turns on and off
automatically.
70
advanced accessory shoe for cable-free
q
CK
LO
e
w
r
CK
LO
t
L O
C K