Using Rds (European Model Only); Displaying Rds Information; Searching For A Program Type - Pioneer XV-HTD1 Operating Instructions Manual

Using RDS (European model only)

Displaying RDS information

You can choose to display Program Service name (PS),
Program Type (PTY), or Radio Text (RT) for the FM
station you're listening to.
1 Press SYSTEM DISP repeatedly to select
the RDS information you want to display.
Switch between:
• (Program Service name)
PS
• (Program Type)
PTY
• (Radio Text)
RT
• (see below for more on this)
SEARCH
• (don't display any RDS data)
OFF
The RDS information will appear after a few seconds.
• The RDS indicator will light in the RDS mode.
• If no RDS signal can be received, the no data
message will be displayed.
• If there is noise during the RT scroll display when in
the RT mode, some characters may be temporarily
displayed incorrectly.
• In the RT mode, when no RT data is transmitted, no
radio text data is displayed.
• During RDS broadcast reception in the PTY mode,
no type data may be displayed. In this case, it will
automatically switch to PS mode after a few seconds.
All manuals and user guides at all-guides.com

Searching for a program type

You can search for a station that is broadcasting any
program type from the list on page 32.
1 Select FM with the TUNER/BAND button.
2 Press SYSTEM DISP repeatedly until
SEARCH appears in the display.
3 Use 4 and ¢ to choose the program
type, then press SYSTEM DISP.
You can search for any of the program types listed on
page 32.
After pressing /
DISP RDS
through the station presets for a match. When it finds
one, the search stops and the station plays for 6 seconds.
4 If you want to keep listening to the
station, press SYSTEM DISP within the 6
seconds.
If you don't press
SYSTEM DISP
, the system starts searching
, searching resumes.
8
33
En