Continuous Shooting And Exposure Bracketing - Canon DC10 Instruction Manual

Continuous Shooting and Exposure
Bracketing
Single
Continuous Shooting
High-Speed Continuous
Shooting
AEB (Auto Exposure
Bracketing)
1. Set the camcorder to record still images on the card (
and move the mode switch to a position other than
If you are recording stills on the disc (
( 36).
2. Press the DRIVE MODE button repeatedly to cycle between the drive
modes.
3. Press the PHOTO button halfway.
4. Continuous Shooting/High-Speed Continuous Shooting: Press the
PHOTO button fully and hold it pressed down.
A series of still images will be recorded as long as you hold the PHOTO button
pressed.
Auto Exposure Bracketing: Press the PHOTO button fully.
Three still images in different exposures are recorded on the memory card.
The drive mode can also be selected from the FUNC. menu (
When the FUNC. menu is being displayed, the DRIVE MODE button cannot be
used.
66
Records a single still image when you press the PHOTO
button.
Captures a quick series of still images while you press the
PHOTO button. For the number of frames per second,
refer to the table on the next page.
The camcorder records a still image in three different
exposures (dark, normal, light in 1/2 EV steps), allowing
you to choose the shot you like the best.
), change the media for the still images
Mode switch
PHOTO button
DRIVE MODE button
/
.
59).
)