Canon DC10 Instruction Manual page 124

Problem
The disc cannot be ejected.
The camcorder vibrates.
The disc's rotation can be
faintly heard.
Occasionally the operation
sound can be heard.
After using the camcorder for
a long time the
in red.
Recording/Editing
Problem
" " flashes red on the screen. The camcorder malfunctions. Consult a Canon Service
Image will not appear on the
screen.
"SET THE TIME ZONE,
DATE AND TIME" appears on
the screen.
Pressing the start/stop button
will not start recording.
Even after stopping recording,
the disc access indicator does
not go off.
The point where the start/stop
button was pressed does not
match the beginning/end of
the recording.
The recording suddenly stops
shortly after starting
recording.
Camcorder will not focus.
124
Turn off the camcorder, disconnect the compact power
adapter and remove the battery pack. Restore the power
supply and try again.
The camcorder has exceeded it operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.
Depending on the condition of the disc, the camcorder might
vibrate occasionally. This is not a malfunction.
The disc is activated from time to time. This is not a
malfunction.
The disc is activated from time to time. This is not a
malfunction.
This is not a malfunction. Turn the camcorder off and let it cool
lights up for a while before resuming operation.
Center.
Set the camcorder to
Open the lens cover.
Set the time zone, date and time.
Recharge the built-in lithium battery and set the time zone,
date and time.
Set the camcorder to
Load a disc.
The disc is full ("
recordings (DVD-RW in VR mode) to free some space or
replace the disc.
Disc is protected. Cancel the disc protection or replace the
disc.
The camcorder has exceeded it operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.
The scene or still image is being recorded on the disc.
There is a slight interval between pressing the start/stop
button and the actual start of the recording on the disc. This is
not a malfunction.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth
or replace the disc.
The camcorder has exceeded it operational temperature.
Disconnect the compact power adapter and remove the
battery pack and let the camcorder cool down before resuming
use.
Autofocus does not work on that subject. Focus manually.
Adjust the viewfinder with the dioptric adjustment lever.
Lens is dirty. Clean the lens.
Solution
Solution
.
.
END" flashes on the screen). Delete some
–
–
–
–
–
–
33
28
134
33
31
31
87
90
–
33
35
–
–
52
24
137