Selecting An Effect - Canon DC10 Instruction Manual

Selecting a Fader
( 59)
1. Set the camcorder to record movies (
switch to a position other than
2. Press the FUNC. button.
3. First, select (
from the left side column and then select (
[ FADER] option from the bottom bar and press
( ).
4. Select (
The selected fader will be demonstrated on the current screen and will also be shown
in a small animation at the right corner of the bottom bar.
5. Press the FUNC. button to save the setting and close the menu.
The symbol of the selected fader appears.
6. Press the D.EFFECTS button.
• The symbol changes to green.
• Pressing the D.EFFECTS button again deactivates the fader.
7. Fade in: Press the start/stop button in record
Fade out: Press the start/stop button in record

Selecting an Effect

( 59)
1. Set the camcorder to a recording mode (
and move the mode switch to a position other than
2. Press the FUNC. button.
72
D.EFFECT OFF
) the current digital effects symbol
) a fader from the list.
pause mode.
mode.
D.EFFECT OFF
) and move the mode
.
) the
or )
.