Canon DC10 Instruction Manual page 129

Message
DISC ERROR
ACCESS ERROR
DISC COVER IS OPEN
NO DISC
UNABLE TO RECOVER
DATA
UNABLE TO RECOVER
DATA INITIALIZE THE
DISC
LOADING THE DISC
OPENING THE DISC
COVER
Memory Card Related Messages
Message
NO CARD
NO IMAGES
CARD ERROR
CARD FULL
NAMING ERROR
UNIDENTIFIABLE
IMAGE
TRANSFER ORDER
ERROR
TOO MANY STILL
IMAGES DISCONNECT
USB CABLE
Disc could not be read. Try cleaning it or replace the disc.
This message can also appear if the camcorder has exceeded its
operational temperature. Disconnect the power adapter and
remove the battery and let the camcorder cool down before
resuming use.
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
There was a disc error when reading the disc or attempting to
write onto it. Try cleaning the disc or replace it.
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
Verify the disc is correctly inserted and close the disc cover.
No disc is loaded. Insert a disc.
You inserted a disc recorded in a different Television System (PAL
or SECAM).
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
Could not recover a corrupted file. Initialize the disc.
This message can also appear if condensation has formed. If you
suspect condensation is the reason, do not initialize the disc and
wait until the camcorder dries completely before resuming use.
Could not recover a corrupted file. Initialize the disc.
This message can also appear if condensation has formed. If you
suspect condensation is the reason, do not initialize the disc and
wait until the camcorder dries completely before resuming use.
The disc is being read. Wait before you start recording.
Do not force the disc cover open before it opens automatically. If a
disc is already loaded, this may take a moment.
Memory card not is inserted into the camcorder.
No images are recorded on the memory card.
A memory card error occurred. The camcorder cannot record or
display the image.
The error may be temporary. If the message disappears after 4
seconds and " " flashes red, turn the camcorder off, remove the
card and reinsert the card. If "
continue recording/playback.
Memory card is full. Erase some images to free some space or
replace the memory card.
The folder and file numbers have reached their maximum value.
The image file is corrupted or it was saved using a compression
method other than that compatible with this camcorder (JPEG).
You attempted to set more than 998 transfer orders.
Disconnect the USB cable and decrease the number of still
images on the memory card or disc to less than 1800. Images
cannot be erased from a DVD-R or DVD-RW disc recorded in
VIDEO mode. If a dialog appeared on the computer screen, close
it. Reconnect the USB cable.
Explanation
Explanation
" changes to green, you can
133
–
E
127
133
127
31
31
–
127
91
127
91
127
–
31
30
–
–
94
–
–
112
–
129