Kenwood TH-22AT Quick Start Manual page 9

TM-V7A FAQ
Q. Does the TM-V7A do crossband repeat?
A. Yes, it does full duplex cross band repeat
Q. Can the TM-V7A be remote controlled?
A. Yes the TM-V7A can be controlled remotely
Q. My TM-V7A will not hold memories?
A. Yes it will just Push the PM key, and then VFO key
Q. Using the optional VS-3 voice synthesizer what information will it announce?
A. It will announce VFO, MR, PM, MENU, & Frequency
Q. Can I display Alpha Numeric, and frequency display at the same time?
A. Yes you may view both simultaneously
Q. Is the TM-V7A PC programmable?
A. Yes it is PC programmable with the Optional PG-4S programming cable. The software is our on
Web Page for Free downloading.
Q. Is the TM-V7A easy to program?
A. Yes it is, and it has a Guide built-in if you misplace your manual
Q. How do I use the automatic simplex checker?
A. Press the REV for 2 seconds the ASC indicator will show, when it blinks simplex communication
Is now possible.
Q. What is the data port used for?
A. It is used for data communication, and also for PC programming.
TM-D700A QUICK START
1. Press the VFO Key
2. Enter the desired frequency
3. Press the F key then the Shift key to select your offset – or +
4. For repeaters with a PL/Encode press the Tone key until a T shows in the display
5. Selecting a PL/Encode frequency (example 100.0) , press the F key then press the T.Sel
6. The PL/Encode number will appear in the display flashing, turn the main tuning knob to the
desired PL/Encode, then press OK.
7. Storing this information in memory, press the F key the memory number will be flashing in the
top of the display. Turn the main tuning knob to select desired memory number, then press the
M.IN key to store it.
8. To recall memory press MR key
TM-D700A FAQ
Q. Is the TM-D700A PC programmable?
A. Yes, it is via the RS232 DB-9 connection in the front on the radio. It may be done with a Straight
DB-9 to a DB-9, it can NOT be a null cable.