Kenwood TH-22AT Quick Start Manual page 5

Q. Can I use the BC-17 while operating the radio?
A. No, the BC-17 is a charger only, not a power source
Q. What do I need to make the Sky Command work?
A. TH-D7A (2), PG-4R (1), and (1) TS-570S/D(G), or TS-870S
VC-H1 FAQ
Q. How many pictures can I store?
A. 10 pictures in memory
Q. Can I send pictures without using the VC-H1?
A. Yes
Q. Can I send moving pictures
A. No, SSTV is still shots only
Q. Can I use the VC-H1 with non Kenwood radios?
A. The VC-H1 can be used on any transceiver. The supplied cable is wired for Kenwood
handhelds
Q. What are the pixels?
A. The pixels are 270,000 and the resolution is 572 x 492 pixels
Q. What modes does it have?
A. Robot 36, 72, Scottie S1, S2, AVT 90, 94, Martin M1, M2, Fast FM
Q. Can it be connected to a video monitor?
A. Yes
Q. Does it come with software?
A. No. You can get the KCT-24S software from your dealer
Q. Does Kenwood make cables for other radios?
A. No
Q. Will it accept NTSC video input?
A. NO
Q. Can I connect a digital camera or video camera?
A. Yes. You can a digital camera for higher resolution pictures if you like.
TM-261A/ TM-461A QUICK START
1. Entering Frequency
a) Press VFO
b) Select frequency using the dial knob
c) If required, select shift by pressing F then shift until proper offset appears