Kenwood TH-22AT Quick Start Manual page 6

2. Selecting Tone
a) Press tone until T appears on the display
b) Press F for more than one second
c) Using the dial knob, go to menu "TO"
d) Press SEL (VFO) key. Tone frequency should blink
e) Select tone using the dial knob
f) Press F
3. Memory Entry
a) Press F
b) Select memory number using the dial knob
c) Press MR to store
4. Recall Memory
a) Press MR
b) Select memory number using the dial knob
TM-261A/TM-461A FAQ
Q. Does the TM-261A direct entry?
A. Yes, via the MC-53DM microphone
Q. How do you store alpha in the TM-261A?
A. When you have chosen a memory, turn the radio off, hold down the MN button. Turn the
radio on, then push REV and follow the instructions in the manual
Q. Can the brightness be adjusted?
A. The display lighting has no adjustments
Q. Will the TM-261A clone?
A. Yes, it will clone with another TM-261A
TM-331A QUICK START
1. Entering Frequency
a) Press VFO
b) Select frequency using the dial knob
c) If required select shift by pressing the shift key until the desired offset is chosen (–) or
(+)Selecting Tone
d) Press Tone key until a T appears in the display
e) Press the F key for more than one second.
f) Press Tone again, select tone frequency from main tuning knob
g) Press F
2. Memory Entry
a) Press F
b) Select memory number using the main tuning knob
c) Press MR to store
3. Recall Memory
a) Press MR
b) Select memory number using main tuning knob