Kenwood TH-22AT Quick Start Manual page 3

A. Yes, but the information will only be furnished with a copy of your Mars/Cap license.
TH-79A QUICK START
1. Entering frequency
a) Press band
b) Press VFO
c) Select frequency by using the dial knob or entering the last five digits of frequency
2. Selecting tone
a) Press band
b) Press F then press TONE(SHIFT). T should appear on display
c) Press F then press TONE SEL(6)
d) Using the dial knob select tone frequency
e) Press VFO
3. Memory Entry
a) Press F
b) Select memory number using dial knob
c) Press MRIN (MR) to store
4. Recall Memory
a) Select Band
b) Press MR
c) Select Memory number using dial knob
TH-79A FAQ
Q. What is the difference between the TH-79A, TH-79AD, & the TH-79AKSS?
A. No memory lock out / with memory will lock out, cloning /Kenwood Sky Command
added, cloning, and remote control of the TS-570D/S & TS-870S
Q. Will the TH-79A receive two frequencies at the same time?
A. Yes, VHF/UHF, VHF/VHF, and UHF/VHF
Q. Is the TH-79A capable of in band Rx?
A. Yes
Q. Can you operate the TH-79A in cross-band repeater?
A. Yes, the TH-79A can be a cross band repeater
Q. Does the TH-79A have channel display?
A. Yes
Q. Is the TH-79A Mars/Cap capable?
A. Yes, we will furnish the information with a copy of your Mars/Cap license
Q. Is the TH-79A PC programmable?
A. The TH-79A can be cloned from another TH-79A with the like version but PC
programmability is unavailable
Q. Can I control the TM-V7A with the TH-79A?