Kenwood TH-22AT Quick Start Manual page 7

TM-331A FAQ
Q. Does it come with a back-lit microphone?
A. Yes, the new TM-331A comes with a MC-52DM back-lit microphone
Q. How many memories does it have?
A. It has 20 memories
Q. What is the output power?
A. The output is 25 watts
TM-642/TM-742 QUICK START
1. Push the VFO button
2. Enter the desired frequency
3. Push the SHIFT button to select + or -
4. Push the TONE button, so the T appears in the display
5. Selecting tone/encode, push the F button for more than two seconds, then push TONE. The
PL/Encode number will be displayed (example 88.5). Turn the main tuning knob to the desired
PL, then push the F button to go back to the normal display.
6. Storing all this information into MEMORY, push the F button and release it the numbers for
memory will appear in the right of the display. Turn the main tuning knob to the desired
Memory of your choice, then push MR button this will store all the information into the memory
you choose
7. To recall that Memory just push the MR button
TM-642/742 FAQ
Q. Can the TM-642A/TM-742A cross band repeat?
A. Yes, it can cross band repeat
Q. Can you see and hear all three bands
A. Yes, you can see and hear all three bands simultaneously
Q. Is the front face detachable?
A. Yes, it is with optional DFK-3,. 4, 7 detachable front panel kits
Q. Is it Mars/Cap modifiable?
A. Yes, we will furnish the information with a copy of your Mars/Cap license
Q. How many memories does it have?
A. 101 memories per band
Q. Will it receive aircraft?
A. Yes, the frequency range on VHF band 118.000 – 174.000 MHZ
TM-G707A QUICK START
1. Push the VFO key
2. Enter the desired frequency
3. Push the Tone key until the T shows in the display for repeaters with PL/Encode