Troubleshooting - ION Trailblazer User Manual

Troubleshooting

If the unit is not charging: Make sure the power adapter is properly connected to the power input
and the power outlet.
If the sound is distorted: Try lowering the volume control of your sound source.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the
bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If you cannot connect your audio device to Trailblazer
•
Have your audio device (e.g., smartphone or tablet) and Trailblazer
possible while trying to connect. Make sure both the audio device and Trailblazer
unobstructed by walls, furniture, etc.
•
Reset the Bluetooth connection on Trailblazer
device and restart the search process. If this does not work right away, power off Trailblazer
and then power it back on. See
•
Reset the Bluetooth connection on your audio device by turning Bluetooth off and back on. You
can find this under the Bluetooth menu in the Settings for your phone or other audio device.
If this does not work, and you have connected to Trailblazer
of available or previously connected devices in your audio device's Bluetooth menu, tap the
"gear" or "i" icon located next to it and then select Unpair or Forget. Turn Trailblazer
back on and try pairing again once it reappears in your available devices list.
Note: If Trailblazer
you may need to repeat this process with that audio device to fully disconnect.
10
Pairing a Bluetooth Device
™
has been paired to another audio device recently that is still within range,
™
via Bluetooth:
™
to disconnect Trailblazer
for more information.
™
before, find Trailblazer
™
as close together as
™
™
from any other audio
™
in the list
™
off and
are
™