Maintenance - Modena Doppio Series User Manual Book

1. In order to avoid unwanted incidents, always disconnect from the power cord from the power
source before cleaning the dispenser.
2. This dispenser has been disinfected prior to shipping.
3. Bottle support collar, water tube, and heating element must be cleaned by expert technician once
a year to maintain the machine to its good condition and to extend the appliance's lifespan. Do
not attempt to disassemble the machine in order to avoid damage to the machine.
4. Use soft and wet cloth to clean the surface of the dispenser. Use soft and dry cloth to dry the
surface. Do not let water enter the appliance's engine.
5. Make sure the power cord is unplugged from the power source when draining the remaining water
or when in a maintenance or when not in use for a long time. Meanwhile, when the water from the
hot tap is cold, open the drain valve until there is no water in the appliance.
a. Install the dispenser on even surface. Avoid placing it in a humid place. A
minimum distance of 20 cm from the wall must be provided. Do not store
flammable substances near the dispenser.
b. To avoid damage to the machine, avoid connecting power cord or
pressing the heating switch (red) until the hot water comes out of the hot
water tap.
If the dispenser won't be used for a long period, turn off the heating and
c.
cooling switches and disconnect the cord from the power socket and
drain the remaining water through the drainage.
d. Do not use chemical substances or directly pour water to clean the
dispenser. Use soft cloth instead.
e. Do not pull the cord to disconnect the power cord from the power socket.
Hold and unplug it from the head with dry hand.
Part 4 :

Maintenance

Part 5 :
Precaution Action
9