Table of Contents
Advertisement
ACL-ON-Nozzle
(Optimizer nozzle)
Ignitor/flame rod
Gap should be 1/8"
to inside edge of
nozzle
Low pressure ring
ACL HE-ON Burner Front View
Pilot sight port
Air dampening
& Deflector blades
(factory adjusted to 30 )
Field adjustable
ACL HE-ON BURNER
1/2" NPT Bulkhead
ACL-I-ON
(Ignitor/Flame rod)
nozzle
insert
------------
------------
ACL 2 piece
nozzle supplied
Note: This pilot assembly can be used as a stand alone
unit using adjustable bracket or incorporated with our
ACL-HE-ON Burner assembly as shown. Simply un-
screw 3/4" bulkhead located on ACL-HE-ON Burner.
Pilot Nozzle
Ignitor/flame rod gap
should be 1/8" to inside
edge of nozzle
ACL-I-ON
(Ignitor/flame rod)
11
ACL 5100 Combustion Safety Controller
ACL 5100 Combustion Safety Controller
ACL V-SERIES
ACL-M Series
Venturi
(Air fuel mixer)
Burner
BURNER BARREL
Barrel
Auxiliary
air inlet
1/2 " nipple
By Customer
(Recommended SCH 40/Reamed)
M50A PILOT ASSEMBLY
Pilot Assembly
Ignitor/Flame Rod
gap should be 1/8"
to inside edge of
nozzle
3/4" NPT Bulkhead
(For pilot)
ACL M-SERIES
AIR SHUTTER
Fuel
Connection
FUEL
LOCKNUT
Air Shutter
M50 Pilot Mixer
ACL-I-ON
Ignitor/Flame Rod
Detail of Flame Rod
Positioning
Advertisement
Table of Contents
