Page 1
ACL is not responsible for the misuse or incorrect application of this product. 805 Main Ave. West - Box 2002 Sundre, Alberta T0M 1X0 - Phone: (877) 638-5234 - Fax: (403) 638-4973 - Email: aclmfg@telus.net...
Page 2
ACL CSC 200 Combustion Safety Control Manufacturing Inc.
Page 3
DESCRIPTION The ACL CSC 200 is designed to be used in conjunction with the ACL combustion module for a complete safety combustion device. The ACL CSC 200 provides burner ignition and flame fail, as well as monitoring of two separate thermocouple inputs which...
POWER The ACL CSC 200 Combustion Safety Control operates in a voltage range between CONNECTION 10-30 Volts DC. The terminals are #19 positive, #20 negative, and #22 ground.
Page 5
ALARM The alarm status provides for remote indication of whether the CSC 200 is in a normal operating mode or if it is in a shutdown state, or turned off either remotely STATUS or locally.
Intermittent pilot (I) or Continuous pilot (C) features can be accessed through the dip switch settings. See dip switch diagram, indicated by I /C. INTERMITTENT The ACL CSC 200 controller provides this feature for applications where a continuous pilot may not be desirable. The pilot output is only energized when the PILOT (Pilotless) controller is calling for heat.
ACL CSC 200 Combustion Safety Control INSTALLATION ADJUSTING SET POINTS Selects temperature input 1 or 2 on display Temp 1 - Bath or process temperature Temp 2 - High temperature shutdown Displays and increases temperature set point - Hold button down to scroll to desired set point then release.
Page 8
ACL CSC 200 Combustion Safety Control Dip Switch Option Chart PWR FAIL LATCH SOLENOID DRIVER DIP SWITCHES HIGH TEMP LATCH S/D LATCH I/C PILOT Selecting dipswitch 1,2,or3 or PWR SAVE any combination will provide a percentage of cycle time for...
Page 9
ACL CSC 200 Combustion Safety Control CSC 200 Yellow (TC-1) TC-1 Type K Thermocouple Yellow inputs (TC-2) TC-2 Ignition ON/OFF Remote reset S/D (Jumper when not used) Shutdowns AUX LLSD PSD Alarm (dry contacts) contact Proof of closure POC (Jumper when not used)
ACL CSC 200 Combustion Safety Control SPECIFICATIONS CHART Current Current Power Power Relay Contact Voltage (max) (power save mode) (max) (power save mode) Operating Temp. Max Allowed Controller Only Controller Only Controller Only Controller Only 12 VDC .500A .10A 1.2W...
Page 12
Liability Statement ACL Manufacturing Inc. Shall not be liable for any special, indirect, consequential or other damages of a like general nature, including, without limitation, loss of profits or production, or loss of expenses of any nature incurred by the buyer or any third party.