Mitsubishi Electric MA-E100R-E Service Manual page 38

(14) Removing the Turntable
1 Remove the two fans and two blower
motors.
→ (See "(13) Removing and Replacing
Two Fans and Two Blower Motors".)
2 Remove the six turntable mounting screws
(two screws in three places) and the clip
mounting screw at the center, and then pull
out the clip to remove it.
<Reference>
• Turntable mounting screws (two screws in
each place) can be found by turning the fan
case clockwise. (See the photo 2.)
3 Remove two power cord holder mounting
screws and disengage two tabs on the back
of the bottom panel to set the power cord
free.
4 Remove four turntable mounting screws
from the back of the turntable, and then
pull out the turntable from the fan case to
remove it.
→ (Removing the Turntable)
Turntable
mounting screw
Turntable
mounting
screw
Power cord holder mounting screw
3
Power cord holder
4
Turntable
4
38
Clip mounting screw
2
Turntable Clip
2
Turntable
mounting
screw
3
Power cord
4
Fan case
Turntable
mounting
screw
Fan case
Tab
Turntable
mounting screw
Turntable