Mitsubishi Electric MA-E100R-E Service Manual page 36

(11) Removing the Top Panel
1 Remove the two louver motor assemblies.
→ (See "(10) Removing and Replacing Two
Louver Motor Assemblies".)
2 Remove the top panel from the two left tabs and
two right tabs mounting it.
→ (Removing the Top Panel)
(12) Removing and Replacing the LED Circuit Board
1 Remove the top panel.
→ (See "(11) Removing the Top Panel".)
2 Disengage the two joints and two tabs inside
the top panel and remove the LED circuit board
case while outwardly opening the ribs on both
sides that mount the case.
3 Remove the LED circuit board mounting screw,
and then remove the LED circuit board from the
three tabs of the LED circuit board case.
→ (Removing and Replacing the LED Circuit
Board)
LED circuit board mounting screw
3
Tab (3 places)
Inside of
top panel
LED circuit board
LED circuit board case
36
2
Tab
2
Tab
2
2
LED circuit
board case
LED circuit board case
2
Joint
Rib on both sides
Top panel
Top panel
Tab (inserted)