Storage; Disposal; Troubleshooting - Briggs & Stratton P0820B Operator's Manual

Table of Contents

Advertisement

Available languages

Available languages

STORAGE

■ Remove the battery and store it in a cool dry location, if
possible. Charge the battery every two months when not
in use in order to increase its life.
■ Remove the battery and store in a secure location out of
the reach of children.
For battery storage longer than 30 days:
■ Store the battery where the temperature is below 80°F
and away from moisture.
■ Store battery in a 30%-50% charged condition.
■ Every two months of storage, charge the battery as
normal.
To reduce the risk of electric shock, fire, or serious
personal injury, always remove the battery when servicing
or transporting the powerhead
SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUTHORIZED SERVICE CENTER
servicing, use only identical replacement parts.

DISPOSAL

Always dispose of discarded or used battery packs
according to federal, state and local regulations.
RBRC (Rechargeable Battery Recycling Corporation) Seal
RBRC is a non-profit public service
organization dedicated to recycling used
rechargeable batteries. To find a battery
collection site near you, call toll free
1-800-8-BATTERY or 1-877-2-RECYCLE.
For more information and a listing of
Recycling Locations, visit RBRC online at
www.call2recycle.org.
WARNING
for repair. When

TROUBLESHOOTING

POSSIBLE
PROBLEM
CAUSE
The safety key
is not inserted.
The battery
is not fully
inserted.
The battery is
not charged.
The
powerhead
The lock-
does not start.
out button is
defective.
Battery may
require service
or replacement.
Grass build-
up blocking the
blade.
The motor shaft
The
is bent.
powerhead is
excessively
The tool or
noisy and
accessory is
vibrates.
unbalanced.
6
SOLUTION
Insert the safety key.
Check the connection
between the battery and
the battery port. Make sure
the battery clicks into place.
Charge the battery.
Replace the lock-out
button.
Replace the battery.
Remove battery. Clean
grass build-up from mower
deck.
Stop the powerhead, and
inspect for damage.
Repair before restarting. If
vibration persists, contact
an authorized service
center.

Advertisement

Table of Contents
loading

Table of Contents