Lubrication - Ferris IS3100Z Series Manual

Lubrication

Lubricate the unit at the locations shown in Figure 26
through 29.
Grease:
Use grease fittings when present. Disassemble parts
to apply grease to moving parts when grease fittings
are not installed.
Not all greases are compatible. Ferris Red Grease
(P/N 5022285) is recommended. Automotive-type
high-temperature lithium grease may be used when
this is not available.
Oil:
Generally, all moving metal parts should be oiled
where contact is made with other parts. Keep oil
and grease off belts and pulleys. Remember to wipe
fittings and surfaces clean both before and after
lubrication.
Figure 26. Deck Lift Linkage Pivots
IS3100Z Series - 4 Wheel IS - 61" & 72" Mower Deck
Figure 27. Control Handle Pivots
Figure 28. Deck Lubrication
Figure 29. Front Caster & Wheel
15
RE-PACK RE-PACK RE-PACK
BEARINGS BEARINGS BEARINGS
ANUALLY ANUALLY ANUALLY