Fault
Solenoid valve does not
close, continuous water flow
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
A
authorised by GARDENA.
6. Protection against Frost
Winter storage :
Emptying the pipeline system
UPSTREAM of the valve :
Possible Causes
Solenoid valve installed
opposite to flow direction.
A
Selection lever
set to "ON ".
GARDENA Irrigation Valves are intended for outdoor use and are
only frost-proof to a limited extent. The only way to protect your
Irrigation Valves completely is to remove the valves before the
frosty season begins. Alternatively, you can drain the pipeline
system upstream and downstream of the Irrigation Valve.
1. Turn off the tap and disconnect the hose between the tap
and the GARDENA Water Connection Point Art. No. 2722 /
Art. No. 2795.
This allows the air to flow freely and the supply line can be
drained using the drain valve integrated in the Connecting Point.
Remedy
v Turn solenoid valve
(observe the flow direction).
A
v Set selection lever
"AUTO / OFF ".
to
21