Westinghouse IK009 Installation Manual page 14

14 westinghouse.com.au
INSTALLATION (CONTINUED)
. 5 Rotate slide-bar to lower alignment, mark a line
on cupboard door (Figure 16). Figure 16
Figure 16
. 6 Remove slide-bar and draw line to indicate
central alignment (Figure 17).
Figure 17
. 7 Replace slide-bar and align to centre line
marked in previous operation (Figure 18).
Figure 18
. 8 Secure slide-bar by driving a cupboard screw
into the centre of the inner slot Fig 19. Gently
test closing the door.
Figure 19
. 9 If the action is smooth and the slider does not
move in relation to the cupboard door, drive
another cupboard screw into the end slot Fig 20.
Figure 20