Connect The Cables, Fpg 412 - Xylem FLYGT Concertor FPG 411 Installation, Operation And Maintenance Manual

4 Electrical Installation
c) Connect the analog output cables.
4. Connect the power cables.
The power supply unit must fulfill isolation class II.

4.2 Connect the cables, FPG 412

For more information about the connection terminals, see
24.
2
1
1. Connect T3 and T4 from the pump.
2. Connect the DeviceNet cable between the gateway and the HMI.
16
NO
COM
Signal
Pump run feedback
Sum alarm A
Sum alarm B
Cleaning active / Contactor enable
Signal
Actual power / Actual speed
FPG 411, FPG 412 Installation, Operation, and Maintenance Manual
PSU
Terminal
DO1
DO2
DO3
DO4
Terminal
AO
Minimum value: 4 mA
Maximum value: 20 mA
3
4
5
6
7
Terminals on page
1. Analog input and output
2. Digital inputs
3. + 24 VDC
4. Modbus slave
5. HMI
6. Digital outputs
7. T3, T4