Advertisement
5. While operating the machine, be always sure of a safe and secure operating position especially
when using steps or a ladder.
If someone comes
1. Guard against hazardous situations at all times. Warn adults to
keep pets and children away from the area. Be careful if you are
approached. Injury may result from flying debris.
2. If someone calls out or otherwise interrupts you while working,
always be sure to turn off the engine before turning around.
Maintenance
1. In order to maintain your product in proper working order, perform the maintenance and check-
ing operations described in the manual at regular intervals.
2. Always be sure to turn off the engine before performing any maintenance, checking procedures,
or working on the machine.
WARNING:
The metallic parts reach high temperatures immediately after stopping the engine.
3. When replacing the cutting attachment or any other part, or when replacing the oil or any lubri-
cant, always be sure to use only products which have been certified for use with the product.
4. In the event that any part must be replaced or any maintenance or repair work not described in
this manual must be performed, please contact a qualified workshop for assistance.
5. Do not use any accessory or attachment other than those bearing the mark and recommended
for the unit.
6. Under no circumstances should you ever take apart the product or alter it in any way. Doing so
might result in the product becoming damaged during operation or the product becoming unable
to operate properly.
Handling fuel
1. The engine of the product is designed to run on a mixed fuel, which con-
tains highly flammable gasoline. Never store cans of fuel or refill the tank
of the unit in any place where there is/are a boiler, stove, wood fire, elec-
trical sparks, welding sparks, or any other source of heat or fire which might
ignite the fuel.
2. Never smoke while operating the unit or refilling its fuel tank.
3. When refilling the tank, always turn off the engine and allow it to cool down.
Take a careful look around to make sure that there are no sparks or open
flames anywhere nearby before refuelling.
4. Wipe spilled fuel completely using a dry rag if any fuel spillage occurs dur-
ing refuelling.
5. After refuelling, screw the fuel cap back tightly onto the fuel tank and then
carry the unit to a spot 3 m or more away from where it was refuelled before
turning on the engine.
6. Do not inhale fuel fumes as they are toxic.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61493
(1) Check if everything is
alright!
(1) Refill after the
engine has cooled
down!
Page 8
06
2021-1
Advertisement
