Volume Settings; Ring Volume; Beeper Volume; Speaker Volume - Brother MFC-8670DN User Manual

Volume Settings

Ring volume

You can select a ring volume level from a
range of settings, from High to Off.
While in Fax mode press
adjust the volume level. The LCD shows the
current setting, and each key press will
change the volume to the next. The machine
will keep the new setting until you change it.
You can also change the volume through the
menu, by following the instructions below:
a
Press Menu, 1, 4, 1.
14.Volume
1.Ring
a
Med
b
High
Select ab & OK
b
Press a or b to select Off, Low, Med or
High. Press OK.
c
Press Stop/Exit.

Beeper volume

When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax. You can
select a range of volume levels, from High to
Off.
a
Press Menu, 1, 4, 2.
14.Volume
2.Beeper
a
Med
b
High
Select ab & OK
b
Press a or b to select Off, Low, Med or
High. Press OK.
c
Press Stop/Exit.

Speaker volume

3
You can select a range of speaker volume
levels, from High to Off.
3
To adjust the speaker volume, follow the
instructions below:
a
or to
b
c
You can also change the volume through the
menu, by following the instructions below:
a
b
c
3
Press (Fax)
Press Hook.
Press or .
This setting will stay until you change it
again.
Press Menu, 1, 4, 3.
14.Volume
3.Speaker
a
Med
b
High
Select ab & OK
Press a or b to select Off, Low, Med or
High. Press OK.
Press Stop/Exit.
General setup
3
3
21