Table of Contents
Advertisement
Assembly Instructions
3
Step 3:
1. Attach upright post decoration strip
(77) to the upper upright post (4).
Take the upright post cover (15) from
the main frame (1). Then attach to the
upper upright post (4).
2. Connect motor communication wire
(11) and console communication wire
(12) .
3. Attach upper upright post (4) to the
main frame (1) with flat washer (33),
spring washer (27), Allen C.K.S. full
thread screw (104) and Allen C.K.S. half
thread screw (105), curved washer (28),
spring washer (27), hex self-locking
nut (32).
4. Attach upright post cover (15) and
upright post decoration strip (77) to
the main frame (1). Then install the
Axle (25).
Tip:
Put the wires in the upright post to
prevent folding after connecting all of
wires.
Do not fully tighten the Bolt yet. Make
sure that all screws are in the hexagonal
hole.
25
77
33
27
104
28
27
104
105
12
11
4
15
104
27
28
32
28
33
27
104
28
1
Advertisement
Table of Contents
