Adjustments
Hand Brake and Traction Switches
In time, the hand brake cable may stretch, causing the
engine not to start. If this happens, adjust the cable
(Fig. 2).
1. Pull hand brake lever to 3rd click.
2. Pull hand brake up one additional click.
3. Adjust four U–bracket nuts equally so spring has ten-
sion. Adjustment affects operation of traction switches.
4. Adjust four U–bracket nuts so engine will start and run
when hand brake is at fourth click, but will not start or run
when hand brake is at second click.
Figure 2
Reelmaster 4500–D
Axles and Brakes
Page 6 – 3