Restoring The Device To Its Factory Settings - Silvercrest SFT 81 Manual

338571_2001_silv_Multifunktionsthermometer_Content_IE_NI_DK_BE_NL.indd 35 338571_2001_silv_Multifunktionsthermometer_Content_IE_NI_DK_BE_NL.indd 35
Step 4: SFT 81
Automatic transfer
of data directly after
a measurement:
The app must be
opened and
Bluetooth ® must be
activated on the
device and smart-
phone to do so.
The "HealthForYou" app must be activated for transfer.
We wish to expressly indicate that the software at
hand is not a medical product in accordance with the
EU directive 93/42/EEC.
The displayed values are intended merely as a
visualisation and may not be used as the basis for
therapeutic measures.
Restoring the device to its
factory settings
You can delete all of the data saved on the device,
e.g. settings or saved measurements, by restoring the
device to its factory settings.
Proceed as follows:
Remove the batteries from the device.
To do this, open the battery compartment cover
Step 4: SFT 81
Transferring the data at a later point in time:
Go to memory recall mode ("Display saved
measured values"). Bluetooth
gins automatically.
transfer be-
®
.
3
GB/IE/NI 35
26.05.20 10:55 26.05.20 10:55