Honeywell V9055A Manual page 3

Damper Arm Rating (damper drives one direction only):
Standard Models: 20 lb. maximum at 2-11/16 in. radius at 20°F
to 125°F and 5 lb at -40°F to 20°F (9 kg maximum at 68 mm
radius at -7°C to 66°C and 2.3 kg at -40°C to -7°C).
Model with Damper Shaft Return Spring: 10 lb maximum at
2-11/16 in. radius at 20°F to 125°F and 5 lb at -40°F to 20°F
(4.5 kg at 68 mm radius at -7°C to 66°C and 2.3 kg at -40°C
to -7°C).
3/4 [19.1] BOLT
HOLES (8)
ON 3-3/4 (95)
RADIUS
VALVE SIZE
INCH
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
NEMA 4 Enclosure: Model available.
D
DIM A DIM B DIM C
IN. MM IN. MM IN.
11-1/8 282.6 2-3/4 69.9 8-3/16 208.0
11-1/8 2-3/4 8-3/16 208.0
282.6 69.9
11-1/8 2-3/4 8-3/16 208.0
282.6 69.9
11-1/8 282.6 2-3/4 69.9 8-3/16 208.0
11-1/4 2-7/8 8-5/16 211.1
285.8 73.0
11-3/4 3-3/8 8-13/16 223.8
298.5 85.7
11-3/4 298.5 3-3/8 85.7 8-13/16 223.8
14-1/8 5-13/16 11-7/32 285.0
358.8 147.6
Fig. 1. V9055/V5055 dimensions in inches. (mm).
V9055A,D MODULATING FLUID POWER GAS VALVE ACTUATOR
Damper Shaft: Shaft is 3/8 in. (9.5 mm) for use with 7616BR
Damper Arm. Models available with damper shaft return
spring.
Ambient Temperature Rating:
-40°F to 125°F (-40°C to 52°C) for 60 Hz models, and
-10°F to 125°F (-23°C to 52°C) for 50 Hz and 50/60 Hz models.
Mounting Means: Actuator attaches directly to valve with two
setscrews. Valve and actuator can be mounted in any position.
Installation Dimensions: See Fig. 1.
2
3
[171.5]
6
4
3 23
32
[94.5]
19
3
32 [91]
1
3
G A
B
3
9
16
[233]
D
1/4 INCH NPT
DOWNSTREAM TAP
AND PLUG
1 ALLOW 4 INCHES CLEARANCE FOR ACTUATOR REMOVAL.
2
ADD 1/8 INCH TO DIMENSION FOR MODELS WITH NEMA 4 ENCLOSURE.
3 ADD 1/4 INCH TO DIMENSION A FOR MODELS WITH NEMA 4 ENCLOSURE.
DIM D DIM E DIM F
MM IN. MM IN. MM IN.
5-3/4 146.1 2-1/4 57.2 4-13/16
5-3/4 146.1 2-1/4 57.2
4-13/16
5-3/4 146.1 2-1/4 57.2 4-13/16
5-3/4 146.1 2-1/4 57.2 4-13/16
8-3/8 212.7 2-3/4 69.9
7-19/32
9-1/4 235.0 2-3/4 69.9 7-19/32
9-1/4 235.0 2-3/4 69.9 7-19/32
12-1/2 317.5 4-5/8 117.5
—
3
27
32 [21.5]
5 [127.0]
3
1 [30]
16
KNOCKOUT
FOR1/2 INCH
CONDUIT (4)
9
1
32
[32.5]
C
E
OCTAGON
F
1/4 INCH NPT
UPSTREAM TAP
AND PLUG (1/4 BSP
ON INTERNATIONAL
MODELS)
DIM G OCTAGON
MM IN. MM IN. MM
13-1/8 333.4 2-13/16 71.4
122.2
13-1/8 333.4 2-13/16 71.4
122.2
13-1/8 333.4 2-13/16 71.4
122.2
13-1/8 333.4 2-13/16 71.4
122.2
13-1/4 336.5 3-1/2 88.9
192.9
13-3/4 349.3 4-1/2 114.3
192.9
13-3/4 349.3 4-1/2 114.3
192.9
16-3/16 411.0 — —
—
M7321
60-2311-11