Prototyping Area - XESS XStend Manual

Figure 1: Jumper settings for codec sampling rate de-emphasis
Here are the connections from the XS40 Board to the codec interface on the XStend Board
(expressed as UCF constraints):
Listing 11: Connections between the XStend stereo codec and the XS40.
# STEREO CODEC CONNECTIONS
NET SDOUT
NET MCLK
NET LRCK
NET SCLK
NET SDIN
NET CCLK
NET CDIN
NET CS_
Listing 12: Connections between the XStend codec and the XS95.
# STEREO CODEC CONNECTIONS
NET SDOUT
NET MCLK
NET LRCK
NET SCLK
NET SDIN
NET CCLK
NET CDIN
NET CS_

2.8 Prototyping Area

The XStend Board has a prototyping area consisting of component through-holes on an
0.1"×0.1" grid interspersed with a network of +5V and GND buses.
LOC=P66;
LOC=P9;
LOC=P6;
LOC=P77;
LOC=P70;
LOC=P44;
LOC=P45;
LOC=P46;
LOC=P66;
LOC=P11;
LOC=P5;
LOC=P72;
LOC=P71;
LOC=P46;
LOC=P47;
LOC=P48;