Table of Contents
Advertisement
9 Operation
The product is a component which requires no settings or changes during
operation. For this reason, this chapter of the manual does not contain any
information on adjustment options. Use the product only within the performance
range provided in the technical data. The machine/system manufacturer is
responsible for the proper project planning of the hydraulic system and its control.
10 Maintenance and repair
Inspection and maintenance work carried out too late!
Damage to equipment!
▶
Carry out the specified inspection and maintenance work at the intervals
described in this manual.
10.1 Cleaning and care
Damage to seals and electrical system by mechanical effects!
The water jet of a high-pressure cleaner may damage the seals and electrical
system of the axial piston unit!
▶
Do not point the high-pressure cleaner at sensitive components, e.g. shaft
seal, electrical connections and components.
For cleaning and care of the axial piston unit, observe the following:
▶
Check whether all seals and fittings on the connections are securely seated to
ensure that no moisture can penetrate into the axial piston unit during cleaning.
▶
Use only water and, if necessary, a mild detergent to clean the axial piston unit.
Never use solvents or aggressive detergents.
▶
Remove external coarse dirt and keep sensitive and important components,
such as solenoids, valves and sensors, clean.
RE 93223-01-B/09.2020, A21VG Series 10, Bosch Rexroth Corporation
NOTICE
NOTICE
Operation
43/56
Advertisement
Table of Contents
