CSSN ScanShell 1000 User Manual page 10

Program Interface
•
Update: Updates your software with the most recent version, using
Live
the Internet.
•
License / Passport, and sets the source for data detection accordingly.
•
state to be used for the OCR recognition template. In the case of the US you
can select 'Auto Detect' (top of the list), or select a state manually from the
state list.
•
Rotate
to control the image orientation prior to saving.
•
Image: Click to enlarge the image for better reading.
Zoom
•
the image source is set to scanner. Otherwise, activates the FILE OPEN
dialog.
Note: 'Toggle to file' is possible only if a scanner is physically connected to the PC, or if
the license key used is a temporary key.
•
Scanner (ScanShell 800 or ScanShell 1000), Magnetic Strip, or an image file
on the hard disk.
•
Scanner
connected to the PC. A red light indicates that no scanner was found.
•
way to control the image prior to saving.
•
SAVE AS dialog if file saving is enabled, or saves the file to the clipboard.
•
Toggle Image
output destination to file or clipboard.
•
•
source for card verification purposes.
MedicScan User Manual version 8.15.5
Category: Toggles between Bar Code / Driver
Driver's license
Image: Rotates the image 90 degrees clockwise. This allows you
Image: Starts the image scan if using manual scan and
Scan
Toggle Image
Connection: A green light indicates that the scanner is
Image: Deletes the scanned image. This gives you a
Delete
File: Active only in manual save mode: Opens the
Save to
Output: Active only in manual save mode: Sets the
Verification: Activates the verification function.
Card
(*MedicScanOCR Only): Sets the reference
Toggle reference
country: Sets the country and
Source: Sets the input image source to
©
Card Scanning Solutions, all rights reserved
10