Operating Mode - ABB NIESSEN 2260 Series Installation And Operating Instructions Manual

OPERATING MODE

This electronic pulsation regulator makes it possible
to control the loads connected to it, either directly or
remotely using conventional pushbuttons.
It does not require any special installation and can
substitute directly switches or regulators already ex-
isting in the installation.
The specific features of this device enable a comfort-
able remote control capability through conventional
pushbuttons with the use of only one conductor, thus
simplifying electrical installations, with the possibility
to substitute the traditional switched installations.
The operation of the regulator during set up, discon-
nection or regulation is as follows:
SHORT PULSATION:
If the regulator is off, upon receiving a short pulsation
it will turn on using always the maximum level of light.
4