ABB NIESSEN 2260 Series Installation And Operating Instructions Manual page 31

1. To connect the device, lift the switch (Fig. 3).
2. Connect the regulator based on the wiring sche-
me (Figs. 1 and 2).
3. Mount the device on the wall box, and then po-
sition the plate. For regulator ref. 2360-XX,
this operation must be performed with the
switch lifted (Fig. 4).
4. To change the fuse, lift the switch, pulling softly
along its edge (Fig. 5) and remove the fuse hol-
der (Fig. 6).
5. To dismount the device, for regulator 2360-
XX, lift the switch (Fig. 5), and then remove
the plate (Fig. 4).
11